2 Pack Soft Close Lid Support Hinges, 150N Adjustable Lid Stay Hardware for Storage Chests and Lift-Top Benches, 0–110° Opening, for Flat or Curved Wooden Lids

Brand: Cramelith

Color: Silver

Features:

• Controlled Close for Lift-Up Lids: Lid stays add resistance to help slow the closing motion and reduce sudden lid drops on chests, trunks, and lift-top benches
• Must Install as a Pair (Left + Right): Designed to be used together for balanced support. Using only one piece can affect hold and closing behavior
• Soft-Close Engages After 90°: Open the lid past 90° to activate the slow-close function; supports opening up to about 110° for access while loading/unloading
• Adjustable Tension to Match Lid Weight: Tune the tension so the lid feels easier to control. A lid that is very light may need lower tension; a heavy lid may require proper mounting position and both hinges
• Fit Check + In the Box: Requires minimum 10 in box depth. Rated support up to 50 lb per pair (varies by lid size and installation). Includes 2 support rods, 4 mounting bases, 10 screws. Materials: steel tubing + aluminum. Length: 15.35 in extended / 9.64 in retracted. Assembly required

model number: K08164

Details: These soft close lid support hinges (lid stays) are designed for wooden lids where you want a more controlled open/close motion. Common uses include storage chests, blanket trunks, lift-top benches, and RV/camper storage compartments.

Quick fit checklist (read before ordering)
- Lid must open past 90° to engage soft-close
- Minimum interior depth: 10 in
- Install both hinges (left + right) for best balance
- Lid weight and mounting position affect closing speed and “hold” feel

How to set up (fast steps)
1) Mount the bases to the lid and the inside wall of the box/bench per your layout.
2) Install both supports and tighten hardware evenly.
3) Test the lid and adjust tension gradually until the closing speed feels right.

Troubleshooting (common causes)
- Lid won’t stay closed / pops up: reduce tension or confirm lid is not too light for your current setting.
- Not slowing down: confirm both sides are installed and the lid opens beyond 90°.
- Difficult to open: reduce tension and re-check mounting position.

Specifications
- Opening range: approx. 0–110° (slow-close after 90°)
- Force rating: 150N (pair rating up to 50 lb; varies with installation)
- Materials: steel tubing + aluminum
- Length: 15.35 in (extended) / 9.64 in (retracted)

What you receive
- 2 × lid support rods (hinges)
- 4 × mounting bases
- 10 × screws
(Assembly required; for adult installation)

Package Dimensions: 11.6 x 3.9 x 1.5 inches